CAD学习Chapter1.pptVIP

CAD/CAM ;Chapter 1;Contents of Chapter 1;Design need;1.1 The Basic Ideas;;CAD Tools Required to Support the Design Process ;Definition of design model;1.1 The Basic Ideas;Process planning;The computer’s job in CAPP;1.1 The Basic Ideas;1.1 The Basic Ideas;1.1 The Basic Ideas;The CAM has evolved from the technology of Numerical Controlled machines. On-board electronic control systems; Programmed by punched paper tape. Automatically generate tool path from 3D models, simulate the cutting action on-screen.;1.1 The Basic Ideas;;1.2 Hardware and Software;1.2 Hardware and Software;1.2 Hardware and Software;1.2 Hardware and Software;1.2.2 Hardware;1.2.2 Hardware;1.2.2 Hardware;1.2.2 Hardware;;1.2.3 Software;1.2.3 Software;1.2.3 Software;1.2.3 Software;Summary;Next time;1.3 Enabling Technologies;1.3.1 Data Management Technology;1.3.1 Data Management Technology;1.3.1 Data Management Technology;1.3.1 Data Management Technology;1.3.1 Data Management Technology;1.3.1 Data Management Technology;1.3.1 Data Management Technology;1.3.1 Data Management Technology;1.3.1 Data Management Technology;1.3.1 Data Management Technology;1.3.1 Data Management Technology;1.3.1.5 Functions of PDM Electro-data warehouse and document management Product configuration management Workflow management Assorting and indexing Project management Knowledge management;Questions:;1.3 Enabling Technologies;1.3.2 Computer Network Technology;1.3.2 Computer Network Technology;1.3.2 Computer Network Technology;1.3.2 Computer Network Technology;1.3 Enabling Technologies;1.3.3 Group Technology;1.3.3 Group Technology;1.4 History and Application;1.4 History and Application;Problems;2.