外部粘贴碳纤维或钢板加固梁中粘结界面应力分析 - polyu ira.pdfVIP

DOI :10.13204/j.gyjz2001.06.001 :碳纤维材料(CFRP)具有极其优异的性能, 如轻质、高强、高弹模、耐磨、耐腐蚀、无磁 性、抗疲劳性能好、 于裁剪、施工方便等特点, 近两年, 在我国建筑和桥梁加固领域的应用迅猛发 展, 专题研究不断深入, 学术探讨异常活跃, 技术规程和产品标准正在积极编制。相信这 一技术的 广泛推广和应用, 必将取得良好的经济效益和社会效益。 为此, 本中心栏目特刊出几篇有关碳纤维材料(CFRP)加固混凝土结构的研究和应用方面的文 章, 以期推动这项技术不断深入和成熟。 张继文　吕志涛 滕锦光　S.T.Smith (　　210096)　　(　) 　　　:。 , , , , 。 , , , 。 , , , LUSAS , 。 　　:　　　　 ANALYSIS OF THE INTERFACIAL STRESSES OF THE STRENGTHENED RC BEAMS EXTERNALLY BONDED WITH CFRP SHEET OR STEEL PLATE Zhang Jiwen　Lǜ Zhitao Teng Jinguang　S.T.Smith 　 (Southeast University　 anjing　210018) (Hong Kong Polytechnic University　Hong Kong) Abstract :The reinforced concrete(RC)beams can be strengthened by externallybonding carbon fiber reinforced polymer(CFRP)sheets or steel plates on their tension faces;howevermuch large shear and normal stresses along the adhesive line at the plate end will occur.These stresses may cause the platedebond at its end andthe strengthened beamsfail prematurely.The available calculation fortheinterfacial stresses is established on the basis of the elastic theory, assuming the stresses over the depth of the adhesive as constants.In this paper, the finite element analysis software LUSAS was applied to study the stress distribution among the adhesive layer including the interfacial stresses, especially focus on theultimate stresses at the plateend.Furthermore, themain factors affecting the peak values of the interfacial stresses were also investigated entirely. Keywor s :CFRP sheet　interfacial stresses　RC beams　strengthening　bonding steel plate 　　 。, : LUSAS , ,