K-Tron K2-ML-D5-S60 失重秤数据.pdf

K-TRON Product Specification K2-ML-D5-S60 Single Screw Loss-in-Weight Feeder A Ext. communication to Host System Each K-TRON Weigh feeder consists C D A Feeder of the components A, B, C and D. B Weighing System Component A is specified here. C Control Module B D Operator Interface Application Gravimetric feeding of free flowing powders, granules and other bulk materials. Design Single screw feeder with interchangeable feeding tool mounted on a D5 weigh bridge. The weigh bridge is stainless steel and the scale housing is completely enclosed. All parts in contact with the material being fed are stainless steel. Feeding equipment is easy to disassemble. The horizontal agitator gently moves the bulk material to the large throat and then into the screws. Feeder screws are easily interchangeable. This equipment conforms to CE standards regarding EMC and safety. Controller: (see separate data sheets) The SmartConnex® control system allows individual or multi-component control. Each feeder has its own control module. Connection between feeders, operator interface and smart I/O is via an industrial network. A variety of protocols is available for connection to the plant’s host system. Hazardous Location Options: (see sheet I-000002) NEC Class II, Div. 2, Groups F G / Class II, Div. 1, Groups F G Class I, Div. 2, Groups C D / Class I, Div. 1, Groups C D ATEX 3D/3D, 3D/2D (outside/inside) Feed Screws and Feed Rates Actual feeder screws are determined based on the material bei