Router 恢复ios.docVIP

System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1) Copyright (c) 2000 by cisco Systems, Inc. PC = 0xfff0ab6c, Vector = 0x500, SP = 0x680127d0 C2600 platform with 65536 Kbytes of main memory PC = 0xfff0ab6c, Vector = 0x500, SP = 0monitor: command boot aborted due to user interrupt rommon 1 rommon 1 tftpdnld Missing or illegal ip address for variable IP_ADDRESS Illegal IP address. usage: tftpdnld [-r] Use this command for disaster recovery only to recover an image via TFTP. Monitor variables are used to set up parameters for the transfer. (Syntax: VARIABLE_NAME=value and use set to show current variables.) ctrl-c or break stops the transfer before flash erase begins. The following variables are REQUIRED to be set for tftpdnld: IP_ADDRESS: The IP address for this unit IP_SUBNET_MASK: The subnet mask for this unit DEFAULT_GATEWAY: The default gateway for this unit TFTP_SERVER: The IP address of the server to fetch from TFTP_FILE: The filename to fetch The following variables are OPTIONAL: TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=7) TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200) TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1) FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx, 4=Auto(deflt) Command line options: -r: do not write flash, load to DRAM only and launch image rommon 2 IP_ADDRESS=0 rommon 3 IP_SUBNET_MASK= rommon 4 DEFAULT_GATEWAY=0 rommon 5 TFTP_SERVER=99 rommon 6 TFTP_FILE=c2600-js-mz.121-2.bin rommon 7 tftpdnld IP_ADDRESS: 0 IP_SUBNET_MASK: DEFAULT_GATEWAY: 0 TFTP_SERVER: 99 TFTP_FILE: c2600-js-mz.121-2.bin Invoke this command for disaster recovery only. WARNING: all existing data in all partitions on flash will be lost! Do you wish to continue?