2012年二级建造师考试试题及答案（Questions and answers for the two construction division test in 2012）.docVIP

2012年二级建造师考试试题及答案（Questions and answers for the two construction division test in 2012） In 2012, the two construction division exam, construction works A single choice (a total of 20 points, 1 points for each question, options for each question, only 1 of the most to do) 1. the main varieties of steel used in ordinary reinforced concrete structures are (). A. hot rolled steel bars B. heat treated steel bars C. steel wire D. steel strand 2. in reinforced concrete beams, the main function of stirrups is (). A. bears the pull produced by bending B. bear the pressure due to bending action C. bears shear D. bear the pressure due to concrete shrinkage and temperature changes 3., a residential building, the floor number of eight storeys, building height of 24.300m, the house belongs to (). A. low rise housing B. multi-storey residential C. high-rise residential D. high-rise residential 4. the building height control area real layer, elevation of outdoor ground -0.300m, roof surface elevation is 18.00m, parapet vertex elevation is 19.100m, highlighting the roof of the refrigerator is the highest point between the top surface of the building, its elevation is 21.300m, the building height (m). A.18.300 B.19.100 C.19.400 D.21.600 5. construction steel tensile test indicators, excluding (). A. yield strength B. fatigue strength C. tensile strength D. elongation 6. masonry structure wall and column thickness ratio checking, is to ensure that walls and columns meet () requirements. A. compressive bearing capacity B. shear bearing capacity C. local compression capacity D. stability 7. determination of concrete cube compressive strength using standard parts, the curing period is (). A.7 days B.14 days C.21 days D.28 days 8. the main function of the level instrument for engineering survey is (). A. direct measurement of Gao Cheng to be fixed B. measures the angle of water between two directions C. measures the elevation difference between two points The D. measures the vertical angl