机组轴封减温水装置自动投入率低原因分析及处理措施!.pdfVIP

内蒙古电力技术 90 INNER MONGOLIA ELECTRIC POWER 2017 年第35 卷第2 期 doi:10.3969/j.issn. 1008-6218.2017.02.001 机组轴封减温水装置自动投入率低原因分析及处理措施 冯云山，郭 升 （北方联合电力有限责任公司包头第一热电厂，内蒙古 包头 014010 ） 摘要：包头第一热电厂1 号机组轴封减温水调整阀经常无法正常调整，轴封减温水装置 自动投入率仅为30%左右，影响机组的安全、经济运行。分析其主要原因为调整阀选型不当， 喷嘴喷头参数不符合设计要求。通过对调整阀的阀芯与底座进行改进，增加喷嘴喷头数量， 改变喷嘴喷头参数，使轴封减温水装置自动投入率提高至96.67% ，使机组达到了安全、经济 运行的目的。 关键词：轴封减温水装置；自动投入率；喷头；调整阀 文献标志码：B 中图分类号：TM621.2 文章编号：1008-6218（2017 ）02-0090-03 Low Input Rate Analysis of Shaft Seal Water Device and Its Treatment FENG Yunshan, GUO Sheng （No.1 Baotou Thermal Power Plant, Baotou 014010, China） Abstract ：The shaft seal water adjustive valve of unit 1 in No.1 Baotou Thermal Power Plant often could not adjust normally. The automatically input rate of the shaft seal water device was around 30%, which affected the safe and economic operation of the unit. The main reason was that the selection of the adjustment valve was improper and the injector parameter was unsuitable for the designing requirement. So improved the existing valve element of the improper adjusting valve and the base, increased the quantity of injector and changed the parameters of injector. Then the shaft seal water reduction device automatically input rate increased to 96.67% , which insured the safe and economic operation of the unit. Key words ：shaft seal water device; automatically input rate; injector; adjustment valve 1 设备概况 为70° ，喷头采用焊接式安装。 北方联合电力有限责任公司包头第一热电厂