03荷载计算（Load calculation）.docVIP

03荷载计算（Load calculation） Bachelors degree in architectural engineering of tongji university § 3 load calculation The permanent load borne by the 3.1 plate 3.1.1 Floor permanent load standard value The 100mm thick plate weighs 25 times 0.1 = 2.5 KN/m2 The floor of the 20mm thickboard is painted 17 times 0.02 = 0.34 KN/m2 The surface layer is 0.65 KN/m2 The standard value of permanent load is approximately 3.5 KN/m2 3.1.2 roof plate permanent load standard value The 100mm thick plate weighs 25 times 0.1 = 2.5 KN/m2 The floor of the 20mm thickboard is painted 17 times 0.02 = 0.34 KN/m2 20mm waterproof mortar 20 x 0.02 = 0.40 KN/m2 Overhead insulation layer 1.3 KN/m2 The standard value of roof plate is approximately 4.6 KN/m2 3.1.3 Permanent load standard for rain plate The 80-120mm thick plate is weighted (0.08 + 0.12) and is used for 2 x 25 = 2.50 kN/m2. A 20mm thickboard is painted 0.02 x 17 = 0.34 kN/m2. 20mm thick waterproof mortar 0.02 x 20 = 0.40 kN/m2. The permanent load standard is 3.24 kN/m2, 3.30 kN/m2. 3.1.4 The standard value of the permanent loading of the board Take the 1m plate and take it to the cell 1, the calculation of the permanent load on the staircase section Triangle: 0.5 x 0.30 x 0.15 x 25 is 1.88 kN/m2140mm inclined board weight: 0.14 times 25 is 0.894 = 3.91 kN/m2 Water grindstone face layer: (0.30 + 0.15) x 0.65 = 0.98 kN/m2 The bottom of the board: 0.02 x 17 is 0.894 = 0.38 kN/m2 The standard value of a ladder plate is 7.15 kN/m2. The calculation of the permanent loading of the platform plate 100mm thick platform weight 0.10 x 25 = 2.50 kN/m2 8 Bachelors degree in architectural engineering of tongji university 20mm thickboard paint: 0.02 x 17 = 0.34 kN/m2 Water grindstone face layer: 0.65 kN/m2 The standard value of the plywood platform is 3.49 kN/m2, 3.50 kN/m 2. The calculation of the standard value of the wall 3.2.1 Exterior wall self-weighted standard value Wall of exterior wall, toilet: 1) use a 200mm thick porous brick 2) the outside t