平法标注（Flat method marked）.docVIP

平法标注（Flat method marked） Refer to the flat labeling The 2009-11-4 reference Aarons drawing of the legal system Chapter I overview The concept of the diagram of the first section The plain legal diagram is an abbreviation for the graphic method of the plane integral representation method drawing rules in concrete structure construction drawings. It is the general graphic method of construction drawings of concrete structures such as design framework and shear wall. 1. The difference between the flat legal chart and the traditional graphical method 1. As the beams and columns of the frame, the methods of steel bar icon of flat legal system, floor plan only painted beams and columns in the chart above, not mapping configuration of reinforcement in the beams and columns of elevation (beam drawing section map; the column on the floor plan, only according to the number one in situ from each different amplification draw the configuration with a steel column section). 2. Traditional frame diagram of beams and pillars, drawing both beam and column plan, and also drawing the elevation drawing and section diagram of the rebar in the beam and column; However, the layout of the steel bar in the flat legal chart is not drawn, but instead, it is to refer to the general representation of the concrete structure drawing and construction detail. 3. The traditional concrete structure construction drawing, can be read directly from the drawing in detail of reinforcement configuration size, while flat legal system needs to find the appropriate detail of a - concrete structure construction drawing plane whole representation mapping rules and constructional detail of the corresponding detail, moreover, reinforced the configuration of the size and the size, in related size (span, anchor length, lap length and bar diameter, etc.) as the variable of the function to express, rather than specific Numbers. This is used to realize the universality of its standard drawing. In a nutshell, plain le