天正建筑命令（Building orders）.docVIP

天正建筑命令（Building orders） Building orders The axis number CPZH is changed to a set of axis Numbers in the chart. The group number is automatically reordered Inverted axis DPZH inverted axis number, applicable to the vertical axis of the specified direction The single axis change DZBH only changes the number of the single axis in the figure Draw the shaft network HZZW including the old version of the straight line network and the arcs The two axis standard LDZB selects the starting shaft and the end axis to mark each axis and the size QSZW of the wall is generated by the wall base line in the existing wall Delete the axis number SQZH to remove the axis number on the existing axis, and the other axis automatically rearrange The complement axis TBZH is based on the existing axis and the new axis number is increased Add the radial axis TJJZ to add the new radial axis online and insert the axis number Add axis TJZX to add axis to the existing axis network and insert shaft number Draw the shaft network HZZW including the old version of the direct line and arcs Point axis ZDZB selects the axes one by one and annotated multiple axis Numbers Axis clipping ZXCJ as part of a rectangular or polygon cropping axis network Axis to change the line of the ZGXX switching axis Pillar menu The standard column BZZ is inserted into a column, cylinder or polygon column in the intersection of the axis The constructional column GZZ inserts a composition of a given width and length in the corner of the wall The Angle column JZ is inserted into the corner of the wall in the corner of the wall to set the length of each section The alien column YXZ turns the column of a closed Pline into a non-standard column The ZQQB on the wall aligned the pillars to the designated wall The wall menu The edge line aligns the BXDQ wall base line and the wall line shifts to the given point A single line variable wall DXBQ will have drawn either a single line or an axis to a wall object represented by a double lin