建筑电气安装工程的通病 文本文档（Building electrical installation engineering of the disease text document）.docVIP

建筑电气安装工程的通病 文本文档（Building electrical installation engineering of the disease text document） 1. The lightning protection grounding does not meet the requirements 1, the phenomenon of (l) the defects such as slag, welding tumor, false welding, meat and welding seam are not found in the connection of the connection between the lower line, the equalizer ring and the lightning protection belt. (2) welding slag is not knocked off and the welding area of the lightning protection zone is not brushed anti-rust paint. (3) replace the steel with rebar with steel. (4) direct use of the main reinforcing bar of the butt welding to make lightning protection. 2. Cause analysis (1) the operator is not responsible, and the welding technique is not skilled. Most of them are multi-handed welders in the electrical engineering class, and the operation skills of antithetical welding are poor. (2) the construction manager of the site shall not perform enough on the national construction and acceptance specification GB50169 2 grounding device. 3. Preventive measures (l) strengthen the skills training for welders, and require that the welds shall be full and evenly distributed, especially for welding, such as opposites welding and pitching welding, etc. (2) to enhance the responsibility of the management and welder, timely weld the unqualified weld, and timely knock out the welding slag and brush anti-rust paint. (3), according to the GB50169 2 electrical equipment installation engineering and acceptance specification for construction of grounding device, lightning protection downlead of connection for lap welding, lap length is 6 times the diameter of the round steel, therefore, are not allowed to lap steel rebar instead of round steel. In addition, as the main rebar construction of the lead wire is welded, it should be added at the touch welding place to catch the round steel. 2. The outdoor indoor pipe is not in accordance with the requirements Phenomenon of l, (1) use thin-walled copper