新风机特点（New fan features）.docVIP

新风机特点（New fan features） General characteristics of panasonic full heat exchanger and panasonic new air converter 1. Low noise, compact and thin shape design for the flow core 2, complete maintenance with 1 check 3. Excellent straight-line exhaust mode of construction 4. Upside-down installation Five, with strong 6. The combination of medium performance filters (additional purchase, site installation) 1. Low noise, compact and thin shape design are implemented for the flow core Complete maintenance with 1 check 3. Excellent straight-line exhaust method for construction 4. Upside-down installation 5. Carry a strong file The whole heat exchange core is reduced (right). The total heat transfer mode is reduced from 287 mm to 230 mm in the same condition as the cross core of the past when the whole heat transfer mode is changed to the flow mode. The total heat exchange efficiency was increased by about 6%, and the total heat exchange efficiency increased by about 6% due to the use of the right direction flow. Great contributions have been made to save energy. The durability of the heat exchanger is achieved through the use of high-efficiency non-woven filter, and the improvement of heat transfer into the shape of the exhaust channel. In cross flow core body, the air line cross, in to the flow core body, due to long time in the core body through the air, as a result, although the thin shape, instead of the heat exchange efficiency improved. Energy saving and ventilation can be achieved by combining heat exchange and air ventilation. (dedicated switch control) Heat exchange for air ventilation, heat exchange and exchange for heat exchange and recycling Emissions of air conditioning energy. Common ventilation, used in the spring or autumn and other indoor without refrigeration or heating, i.e. indoor Air condition is not different from outdoor air. In addition, During refrigeration, when outdoor air temperature is reduced, it is not in the air The heat exchange, instead, br