模具介绍（Mold is introduced）.doc

模具介绍（Mold is introduced） The answer 1. Continuous mode definition A continuous mould is a set of dies in a set of die, in different mould position, at the same time, two or more processes are finished, and the parts are formed and separated from the strip. 2. Characteristics of continuous modules Continuous mould has high production efficiency, easy to feed, safety performance is good, not easy to work safety accidents, easy to implement automation and mechanization, save manpower. But the mould structure is complex, mold parts. 2. Continuous mode process Placed material first step work in continuous mode, the guide plate with fixed lifting guide pin, stamping fell, the upper die plate contact materials, with the closed die, punch and die forming punching, under the interaction of the hole edge into the template, make the punching waste, with the rising slider, at this time, because of the reduced pressure, in the spring of the lower and upper plate separation, punch out material, at this point, as a result of stress reduction, in under the action of the spring plate and the plate separation punch out material, the first step to complete the material after work and punching, move forward a step, by positioning or feeder control interval size, with the upper die down, under the effect of bending punch and concave die, after forming bending forming slider along with the recovery of upper die, bending left die punch, strip, separating from the upper die, finish the second quarter, then bring forward one step, pending products formed blanking separation process, separate the product and material. 3. Function of hardware parts and length calculation method of continuous mould The name of the function calculation External guide column The upper and lower modes are the guide to ensure the uniformity and stability of the upper and lower module External guide column = BP + PP + SB + DB + CB + DD / 2 The guide pin The position accuracy of die - die - die - guide PP + SB + SP