步进电动机变频调速（Stepper motor frequency control）.docVIP

步进电动机变频调速（Stepper motor frequency control） This paper discusses the function of three phase asynchronous motor continuous variable-frequency control system based on variable frequency speed control system Abstract: this design can achieve drive three-phase asynchronous motor variable frequency speed regulating function, innovation point is based on the dsPIC, clever use of when programming with sine table method, avoiding the real-time computing sine function value, save a lot of time for the processor, the three-phase phase difference can be converted to look-up table reading at the same time the difference of the starting position, eliminating the benchmark of sine wave design, under the precondition of precise control simplifies the procedure, has strong practicability. Keywords: variable frequency speed adjustment, three-phase asynchronous motor, continuous voltage The three-phase asynchronous motor is simple in structure, reliable in operation, light in weight and large in power, and is applied in all aspects of production and life. When the motor is running, the speed of the rotational speed of the rotating field has a certain deviation relation, and the speed adjustment performance is worse, and the performance is improved by using the speed regulating system. The SPWM (sine pulse width modulation) technique is widely used in variable frequency speed control system. SPWM control the basic idea is to use a series of continuous rectangular pulse width to approximate the ideal sine wave, the use of a series of continuous triangle wave and sine wave intersection, by controlling the inverter power switch device, conduction on or off in the inverter output a series of width and sine wave amplitude proportional to the rectangular pulse waveform [1]. Changing the width and modulation period of the rectangular pulse can change the amplitude and frequency of the output voltage. The MPLABC30 compiler of Microchip supports the dsPIC30F structure standard library, which