洗衣机介绍（Washing machine introduction）.docVIP

洗衣机介绍（Washing machine introduction） /p-74661077625.html Abstract: this paper introduces the application of PLC and inverter in the control system of industrial washing machine. The system USES the power of Emerson programmable controller and transducer to compose a control system, which satisfies the intelligent control of the operation of the industrial washing machine. Keywords: programmable controller converter industrial washing machine 1, an overview of the Hunan one washing equipment co., LTD. (former medical equipment factory) is specialized in industrial washing equipment production and research and development enterprises. Provide all kinds of automatic washing equipment for hospitals, chemical, petrochemical, hotel and production enterprises. The products are half/fully automatic centrifugal washing machine, semi-automatic horizontal roller washing machine, automatic material crystallizer and more than 30 kinds of washing products. The products are widely used in hospitals, hotel hotels and large enterprises. In recent years, under the influence of fully automatic washing machine of home washing machine, large industrial washing equipment has gradually entered the era of full automatic control from the control mode of the relay. 2. Process flow The whole washing process can be divided into water, washing, water releasing and dehydration. The system starts from the water intake to the end of the dehydration cycle three times. A. system operation cycle three times: the first time circulating drum water to the middle water level to start washing; Second, turn the drum into the water at high water level. B. Washing, standard cleaning, strong washing (according to the normal rotation, stop, reverse, stop the four-step action cycle to the washing time) C. When the drum appears to be in a large vibration during the 20-80hz frequency dehydration, the inverter stops the output until the drum is stopped and then redehydrates from 20HZ. Control requirements and funct