电梯名词解释（Elevator noun interpretation）.docVIP

电梯名词解释（Elevator noun interpretation） A noun explanation of a sundry elevator This document is compiled according to the relevant national and industry standards and norms, as well as the explanatory notes of various materials and documents in the course of our operation and production. Applicable to contracts, random documents, production drawings, etc. Window type (desktop) : it is loaded with a certain load height (windowsill) on the floor below the entrance of the floor. Horizontal type (trolley type) : the loading mode of the floor and floor at the same level with the floor below the entrance of the floor. A cart with cargo can push the car directly. Soil construction: a dedicated elevator shaft is used to anchor the elevator shaft structure on the wall of the well by means of embedded or expansion bolts. The wall of the well is required for concrete or solid brick construction. Steel (frame) frame structure: without special elevator shaft, it is necessary to break the floor to form the elevator shaft, and the ladders adopt the steel frame structure. The steel frame structure is composed of the Angle steel and the shaft frame of the shaft. Support Angle steel and shaft steel welding for each floor of the floor, and support Angle steel and floor board with expansion bolts. P4 and P5: control system, which is generally determined by the manufacturer based on the users actual situation. P4 architecture: the control system of the horizontal signal fixed in the shaft. P5 structure: the control system of the flat layer signal fixed in the cage. 1. Well section: 1. Well: cage and space for motion of heavy equipment. The space is bounded by the bottom hole of the shaft and the top of the shaft. 2. Shaft wall: the structure used to separate the shaft and other places. 3. Shaft width: horizontal distance parallel to the inner surface of the cage width. 4. Well depth: horizontal distance perpendicular to the inner surface of the cage width. 5. Bottom hole: part of the well