钳工技师（Fitter technician）.docVIP

钳工技师（Fitter technician） Assembly bench technician theory knowledge test paper and answer 1) single item selection (question 1 ~ 70). Choose a correct answer and fill in the corresponding letters in brackets. Each one is scored with a score of 70. The substance of professional ethics is (). A, improve personal life B and increase the wealth of society C, establish new socialist labor attitude D, enhance competition consciousness 2. Violations of the safe operation procedures are (). A. formulate production process B and implement safety production rules and regulations C. Strengthen the concept D of the legal system and enforce laws and regulations on national safe production 3. It is () that you dont conform to the clean and civilized production requirements. A, carry out the operation procedure B, implement the rules and regulations C. In the work, the clothes do not require D to create good production conditions What is wrong in the following statement is (). A, for the ribs, spokes and thin walls of the machine parts, such as longitudinal cutting, these structures do not draw the section symbol, and use the solid line to separate it from its adjacent parts B, when the structure of the rib, spokes and holes of the parts are not in the cutting plane, the structure can be rotated to the cutting plane C, long pieces (shaft, bar, profile, connecting rod, etc.) can be cut short when the shape of the length direction is consistent or change according to certain rules. When using this method, the size can not be marked by the original length of the machine D, when the plane in the returnable part cannot fully express the plane in the figure, the plane symbol can be used to express the plane symbol 5. The basic deviation is determined mainly to determine (). A, the location of the tolerance zone B, the size of the tolerance zone C, the precision of the coordination, the machining accuracy of the workpiece The organization of ductile iron can be (). A, ferrite + mass flocc