1.2制图的基本知识（1.2 basic knowledge of cartography）.docVIP

1.2制图的基本知识（1.2 basic knowledge of cartography） This article by Zhang Bin to the next contribution Ppt documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Two Basic knowledge of cartography 2.1, the basic provisions of drawing, 2.2 foot compasses, drawing tools and applications, 2.3 foot compasses, basic geometric drawing, 2.4 foot compasses drawing general steps Abstract: Abstract: this chapter introduces the drawings involved in engineering drawings Format, scale, font, line and dimension marking. Format, scale, font, line and dimension marking. At the same time, the use of drawing tools will be introduced. At the same time, the method of drawing tools, the basic methods and steps of drawing are also introduced. Methods and steps. 2.1 basic rules for drafting Format and format of drawing Map number B * L a C e 20 A0 841 x 841 * 1189 A1 A2 A3 297 x 297 * 420510 A4 210 x 210 * 297 594 x 420 x 594 x 841420 * 5942510 A1 (594 x 841) 594 x 841) A0 (841 * 1189) 841 * 1189) A1 (594 * 841) 594 * 841) A3 A2 (297 * 420) 297 x (420 * 594) A4 420 x Drawing format and border drawing method Drawing format and border drawing method The drawing type X (horizontal) type Y (vertical) of symbols in the special direction symbols when using printed frame drawings or layout constraints, allowing the use of this format, but should draw the direction sign. A Frame line Five 36 B C Boundary line D(a) direction symbols and the representation of Chinese characters in pairs (b) a map partition Format and dimensions of title bar and detail column One hundred and eighty 840448381012 (20) Seven Ten Ten Sixteen Sixteen Twelve Sixteen Seven Serial number Fourteen generation Number name call Number material material Single total weight prepare notes (material mark) 8x7 (= 56) (name of unit) Twelve 2018 title bar Mark number, partition change, file number, signature date, date, design (signature)