Applicion of Digitally Controlled Potentiometers in the Intelligent Sensor’s Measure and Control System.pdfVIP

The Eighth International Conference on Electronic Measurement and Instruments ICEMI’2007 Application of Digitally Controlled Potentiometers in the Intelligent Sensor’s Measure and Control System —兰』 Yu Guoqing Sha Zhanyou An Guochen (Hebei university of science techonology, Shijiazhuang 050054 China) Abstract: Sensor or transducers is a kind of important tool for sensors, computers, communication technologies and completion of signal collection, and is a device which can feel etc. Because intelligent sensor system is a kind of the physical world of light, pressure, temperature, flow, level, international high-tech industries and is rapidly acceleration, force, etc. Then convert this signal into usefulness developed, it will have an important and far reaching output signal according to a certain law. The output of some impact on human society. recently, the new device of sensors, such as piezoresistive sensor, strain sensor bridge DCP can adjust the resister value by digital mode, and sensor, thermocouple sensor, thermal resistance sensor, angle can be changed by μC or logic circuit, so it is used sensor, accelerometer sensor, humidity sensor, capacitive sensor, widely in intelligent sensor measure and control 『1 r piezoelectric sensor etc., is very weak. Its temperature system. dependence and linearity are worse, and the SNR in the process of transference decrease significantly. For this disadvantage, 2 Design of Photodiode the signals must be processed before post-processing. It can be Programm