反应堆压力容器水位测量不确定度评定研究.pdf

Nuclear Science and Technology 核科学与技术, 2017, 5(1), 29-35 Published Online January 2017 in Hans. /journal/nst /10.12677/nst.2017.51004 Research on the Uncertainty Evaluation of Reactor Pressure Vessel Water Level Measurement Jianmin Zhu, Sheng Zhou, Yousen Hu China Nuclear Power Technology Research Institute, Shenzhen Guangdong rd th rd Received: Jan. 3 , 2017; accepted: Jan. 18 , 2017; published: Jan. 23 , 2017 Copyright © 2017 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Open Access Abstract Pressure vessel water level is one of the key parameters in nuclear power plant design and opera- tion. This paper researched on general uncertainty analysis model of pressure vessel water level measurement, based on the standard uncertainty analysis method. And the CPR1000 nuclear power plant RPVL measurement system and data were used to elaborate the specific uncertainty analysis method of water level measurement. This uncertainty analysis method could be retained as reference and guidance to pressure vessel water level measurement design, maintenance and performance improvement. Keywords Water Level Measurement, Uncertainty 反应堆压力容器水位测量不确定度评定研究 朱建敏，周 胜，胡友森 中广核研究院有限公司，广东 深圳 收稿日期：2017年1月3 日；录用日期：2017年1月18 日；发布日期：2017年1月23 日 文章引用: 朱建敏, 周胜, 胡友森. 反应堆压力容器水位测量不确定度评定研究[J]. 核科学与技术, 2017, 5(1): 29-35. /10.12677/nst.2017.51004 朱建敏 等 摘 要 压力容器水位是核电厂设计和运行关注的重点参数之一，本文利用标准不确定度评定方法，结合 CPR1000核电厂RPVL测量方法及相关数据，建立了压力容器水位测量不确定度评定模型，为压力容器 水位测量不确定度评定提出了具体的方法。为今后核电厂压力容器水位设计和运行，以及进行性能改进 提供了理论依据和指导方向。 关键词 水位测量，不确定度 1. 引言