988-单元测试（988 - unit test）.docVIP

988-单元测试（988 - unit test） unit testing Eighth chapter force A choice (every day, 2 points, 30 points) 1. the common tool for measuring force is () A. B. C. electronic platform balance spring dynamometer D. scale 2. what is wrong in the following statement about elasticity? A. does not necessarily produce elasticity between objects that contact each other B. elasticity refers to the force acting on other bodies when the spring is deformed C. elasticity refers to the force of an elastic object that has to be restored to its original object D. pressure, support, tension are all elastic The following 3. on the spring ergometer using the method of argument, is not true () A. measured the stress on a role in When measuring the force of B., the direction of the measured tension should be consistent with the axis of the spring Not more than C. range spring dynamometer measured by force D. spring dynamometer can be measured in any direction of the force 4. the following is true about gravity and quality A. gravity has size, direction, quality, size and direction B. is in space, and the gravity and mass of the object are zero C. on the moon. The gravity and mass of an object are smaller D. gravity and mass will not change 5. as regards the center of gravity of an object, the following statement is incorrect A. the center of gravity of all bodies is in its middle position B. the center of gravity of all bodies is the point at which the object is subjected to gravity The center of gravity of a C. object is not necessarily on the object D. the center of mass of a uniform, regular, shaped object is at its geometric center 6. the gravity of the following object is closest to 1 N A. a hen B. leaves C. a packet of instant noodles a bag of rice D. 7. the following examples of sliding friction are () A. the friction between the wheels of a moving bicycle and the ground B. friction between an object and an inclined plane resting on an inclined plane When the blackboard is rubbed by the