2010年一级建筑师技术设计作图练习60题(In 2010, I took 60 questions on the design of technical design of the first class).docVIP

  • 4
  • 0
  • 约1.56万字
  • 约 24页
  • 2017-07-20 发布于河南
  • 举报

2010年一级建筑师技术设计作图练习60题(In 2010, I took 60 questions on the design of technical design of the first class).doc

2010年一级建筑师技术设计作图练习60题(In 2010, I took 60 questions on the design of technical design of the first class)

2010年一级建筑师技术设计作图练习60题(In 2010, I took 60 questions on the design of technical design of the first class) 1., high-rise building hot water heating system, building height exceeds () m, vertical appropriate partition. A.30 B.50 C.100 source: big exam D.120 2. calculation of heating load, additional heat loss envelope should be according to the percentage of basic consumption is determined, the correction rate (South). A.0~10% B.+15% C.-5% source: D.-15%~-30% 3., the radiator between the staircase as far as possible in (). A. entry layer B. bottom C. what floor? D. intermediate layer source: 4. heating and building glass outside the number of layers of the window and which of the following factors?. A. outdoor temperature B. indoor and outdoor temperature difference C. toward the source: big test D. wall material 5. central heating system does not include the following heating. A. radiator B. hot blast C. hot water radiation D. ventilation source: examination large 6. clean air conditioning production workshop should maintain (). A. positive pressure B. negative pressure C. atmospheric pressure D. no pressure 7. which of the following is the correct description of the air conditioner? A. can only reduce indoor air temperature B. can only reduce indoor air moisture content: C. can reduce indoor air temperature and moisture content D. can reduce indoor air odor 8. determine the amount of fresh air in the air conditioning system. Which of the following factors does not have to be considered? Circulating air volume of A. indoor air B. large number of indoor staff examinations - the countrys largest education website (www.Examda. COM) C. needs to exclude the air flow D. maintains the new air pressure required for positive pressure 9. civil buildings with more rooms and rooms requiring separate control of temperature shall be used. A. all air system B. fan coil unit plus fresh air system C. clean air conditioning exam big - the nations largest education website (www.Examd

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档