基于嵌入式linux的温度采集系统的设计与实现.docxVIP

课程设计论文题目基于嵌入式Linux的温度采集系统的设计与实现学院专 业班 级学 号学生姓名指导教师完成时间2016 年 5 月?摘要数据采集系统是信息科学的一个重要分支，它研究信息数据的采集、存储、处理以及控制等。本文提出采用嵌入式Linux作为操作系统，针对三星公司的S5PV210嵌入式处理器，设计一个嵌入式温度采集系统。论文在分析了Linux设备驱动程序的基本工作原理基础上，讨论了开发中经常会碰到的中断处理、拥塞处理、I/O端口，并在此基础上实现了基于S5PV210嵌入式处理器的开、读、写、关外部RAM的字符设备驱动和网络驱动。结合高精度温度传感器DS18B20，实现温度的正确采集，并通过以太网络将数据上传给上位服务器。论文首先介绍了通信网络中各种设备特性、总线结构及传输技术，然后介绍根据单片机与PC机之间的串行通信原理，用ubantu完成数据采集系统的软件设计与实现，为用户提供一个友好的人机界面，对采集系统进行控制并显示采集后的数据。使用串口线传输数据，为数据采集系统和计算机之间的通讯开辟了新的道路。关键词：数据采集系统；以太网络；S5PV210；DS18B20IDesign and Implementation of an Embedded Temperature Acquisition System based on LinuxAbstractData Acquisition Systemis an important branch of information science, it studies the collection, storage, processing and control of information data. In this paper, the embedded Linux is used as the operating system, and the embedded S5PV210 processor is designed to design an embedded temperature acquisition system. Based on the analysis of the Linux device driver based on the basic working principle discussed development often encounter interruption congestion handling, processing, I / O ports, and on this basis, realized s5pv210 embedded processor open, read, write, outside the ram of the character set by driver and the network drive on. Combined with the high precision temperature sensor DS18B20, to achieve the correct temperature collection, and through the Ethernet network to upload data to the host server.At first, the paper introduces the communication network characteristics of various devices, bus structure and transmission technology, and then introduce according to the principle of serial communication between MCU and PC, ubantu completed software design and implementation of data acquisition system, to provide users with a friendly man-machine interface, to control the acquisition system and display after the collection of the data. The use of serial data transmission, for the data acquisition system and the communication between the computer has opened up a ne