初中数学几何画板教学的案例研究中期汇报doc.doc

《初中数学几何画板教学的案例研究》中期汇报 栾兰数学学科带头人工作室 2009-7 一、研究背景：二、研究目标三、研究方法四、理论支撑五、研究计划主要教过程中的形式，手段、方法，日程安排第章 阶段成果 负责人 设计问卷调查（教师、学生） 调查数据 访谈记录 倪华、姚明秀 初中数学几何画板教学设计模板 模板 牛庆燕、茹巍 对收集的课件进行分类、修改，给出使用指导和建议，形成光盘；课堂实录光盘；网站维护。 光盘 王玮 初中数学几何画板教学评价量表（教学方面）（几何画板设计应用方面） 评价量表 徐建华、范华 §22.8平面向量的加法(1)几何画板教学设计案例研究 研究论文 姚明秀 §22.8平面向量的加法(2)几何画板教学设计案例研究 研究论文 徐建华 §22.9平面向量的减法(1)几何画板教学设计案例研究 研究论文 范华 §22.9平面向量的减法(2)几何画板教学设计案例研究 研究论文 王玮 §24.6实数与向量相乘（3）§24.7平面向量的分解(1)(2)几何画板教学设计案例研究 研究论文 倪华 §22.7平面向量，§24.6实数与向量相乘(1)几何画板教学设计案例研究 研究论文 牛庆燕 §24.6实数与向量相乘（2）几何画板教学设计案例研究 研究论文 茹巍 综合学习、研讨、实施、审稿 中期报告 栾兰 2.区数学教研室课题《初中数学知识发生过程教学的研究》第二阶段研究计划 课题研究内容： 上海教育出版社六年级第二学期（试用本）第章六、研究过程： the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler of the gap should not ex