对口建筑识图（A view of the building）.docVIP

对口建筑识图（A view of the building） Bicolumn: the ratio of the linear dimensions corresponding to the physical object. Title bar: at the bottom right or bottom of each drawing, the title bar mainly represents information related to the diagram. Drawing wide specification is what kind of? Their side? And what is the relationship between AO = 1189 = 841 x 594 x 841 A1 A2 = 594 x 420 A3 = 420 = 297 x 210 x 297 A4 relations between length of A1 = AO / 2 A2 = A1/2 A3 2 A4 = = A2 / A3/2 pattern of dimensioning which a few parts are there? Size limit, dimension line, dimension number, size start-stop symbol, dimension number. Projection: the method of projection of the object. Central projection method: the projection method of the ray intersection. Orthographic method: the projection diagram can reflect the shape and size of the object in a positive way, but it is not intuitive. Write projection method: the method that the ray is parallel to each other but inclined to the projection plane. Overhead projection: perpendicular to one projector and parallel to two other projective planes. Form analysis: the form of projection is decomposed into several relative projection drawing of the basic form of the third class, according to the projection image to come up with their respective representatives of the basic form, and then according to the original position are combined to come up with three sides projection drawing is shown in the shape of the combination. Axonometric projection: it is a projection of the form with three coordinate planes projected onto a projection plane using a set of parallel projective rays that are parallel to any coordinates. Axial Angle: the Angle between the axis of the axis. Cast surface with a plane tangent plane is usually plane parallel surface in the need to express the internal structure will form incision for the fluid projection of figure, profile: use plane tangent plane is usually plane parallel surface in the need to express the internal str