高炉原燃料条件劣化的技术对策（Technical countermeasures for the degradation of the original fuel condition of blast furnace）.docVIP

高炉原燃料条件劣化的技术对策（Technical countermeasures for the degradation of the original fuel condition of blast furnace） Technical countermeasures for the degradation of the original fuel condition of blast furnace 1 the influence of original fuel change on blast furnace has decreased Into the blast furnace powder rate increase, not only affects the permeability of blast furnace and reasonable distribution of gas flow and powder ore easy to frequent coherence and loss on furnace wall, furnace wall caused by unstable, heat load fluctuations, gas flow, influence of blast furnace anterograde. The metallurgical properties of ore are used to measure the properties of the ore in high temperature. As the burden of the furnace declines, the temperature rises, the ore begins to soften; After the softening is finished, the furnace will continue to move downward in the blast furnace and be further heated and reduced, and the ore will melt. Before the slag and metal reach the free flow and accumulate into droplets, the soft melt layer has a poor permeability and the gas is blocked, resulting in a great pressure drop. The high temperature metallurgical performance of the furnace will begin to soften and melt temperature, and the temperature of the molten drop is narrow. The reducible performance of the ore is good, the iron in the ore can be reduced, the indirect reduction is developed, the gas utilization is high, it is favorable to the blast furnace. Bad high temperature metallurgical properties of burden, can make the permeability variation of blast furnace burden drop area, more soft melting zone, which deteriorate the blast furnace burden permeability, destroy the reasonable distribution of gas flow, serious can form pipeline, affect the blast furnace anterograde. Blast furnace with the pellets and the fine ore metallurgical properties, combined with the coke quality is declining, stability in blast furnace, the permeability index increases, furnace condition fluctuation, reduce wind