加热炉钢结构中型钢标准件的生成方法 - Journal of Northeastern.PDF

第31 卷第7期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol131, No. 7 2 0 10 年 7 月 Journal of Northeastern U ni ersity( Natural Science) Jul. 2 0 1 0 赵 曜, 于庆波, 王 坤 ( , 110004) : , , Solid Edge , # , , , CAD , , # # : ; ; ; ; : T F 062 : A : 1005-3026( 2010) 07-0982-04 Investigation on the Method to Generate Medium- Size Standard Sections for Steel Structure of Heating Furnace ZH A O Yao , Y U Qing- bo, WAN G K un ( State En ironmental Protection Administration Key Laboratory of Eco-industry , Northeastern Uni ersity, Shenyang 110004, China. Correspondent: Y U Qing-bo , E-mail: yuqb @ smm. neu. edu. cn) Abstract: Lots of standard sections are indispensable for the steel structure of heating furnace. Designers pay much attention to shortening time required for the generation of those standard sections. According to the structural characteristics of the sections and based on the Solid Edge softw are, the / part family 0 idea is introduced in the design of the standard sections. The parameter information table is used to sort through all of the standard sections. With the principal model shared, the sections of definite specifications can be generated quickly ia the combination of different features and parameters changing. Such a method applies to other CAD platforms for setting up the database of standard sections as w ell, thus shortening the design period and impro ing the design efficiency greatly. Key words: heating furnace; steel structure; standard sections; part family; three-dimensional design [ 1] ,