梁板与柱混凝土标号不同（The beam slab is different from column concrete）.docVIP

梁板与柱混凝土标号不同（The beam slab is different from column concrete） Concrete construction of beam column joint 1 beam column joints common construction method of concrete with different strength grade in 1.1 retaining the adjacent surface of different grades of concrete In the reinforced concrete structure, beam column joint of frame structure of the high-rise building is more complicated, because the load combination and internal force calculation results, the vertical structure required the same layer (column, wall) concrete strength level higher than the level structure (beam, plate) of the concrete strength grade. Reinforced concrete frame structure, horizontal construction joints usually stay in the column, column to stay horizontal construction joints shall be left at the bottom of beam. If the same layer of the vertical component and the horizontal component of the concrete pouring is not at the same time, the construction joints left. In Construction of 1.2 beams and columns of different strength grade concrete pouring According to the high-rise building most commercial concrete mixing station or pump pouring the concrete, beam column joint core vibration method is shown in Figure 1, whether or not to stay top construction joints left, should be the first tower crane bucket or concrete pump conveying column grade concrete in layer vibration, in 45 degree inclined floor beam Banchu set. Before concreting, the concrete is then pumped into the floor slab. By this method, pouring floor columns, walls, beams and slabs of concrete, should not focus on the control of adjacent surface of high-strength and low strength concrete forming cold joint, so it should keep construction joints in top beam at the bottom, in order to reduce the node in the core area of high strength concrete pouring time, avoid high low strength concrete abutment the formation of surface cold joints. At the same time on the beam column joint core reinforced dense small insert vibrator vibrating and pr