墨杠的解决方法（The solution of ink bar）.docVIP

墨杠的解决方法（The solution of ink bar） The solution of ink bar.Txt The solution of ink bar In the practice of flat offset printing, ink bar is a printing quality that often appears and is difficult to be solved thoroughly. Ink bar involves the design of the printing machine, the material and processing technology of the machine parts, the operation of the staff, the selection of printing materials, the maintenance of machinery and equipment and so on. The main reason for the bar in printing is the vibration between the printing drum of the printing press and the movement of the ink supply, water conveyance mechanism or the process of paper splicing, which results in the slippage of the relative position of the imprinting. Therefore, our existing Ping printing equipment and technology can not stop ink bar the emergence of, only through the improvement of technology and operation process to minimize and reduce ink bar production. 1 、 the side gap of the roller meshing gear is too large The side gap caused by the adjustment of center distance is too large. Offset printing machine drum gear basically adopts helical gears, the gear exchange coefficient, smaller space mesh side, in order to reduce the transmission of vibration and impact printing, maintaining stability and accuracy of printing. In actual work, the side gap of the roller gear is adjusted and adjusted with the printing of paper with different thickness. The thicker the paper is, the greater the center distance is adjusted, and the exchange coefficient of the gear surface of the cylinder gear becomes smaller and the backlash becomes larger. The greater the difference in the surface speed of a printed roll, the greater the relative slip f produced by the printed surface, the more pronounced the bar. Solution: under the premise of ensuring proper printing pressure, the center distance between the three rolling parts should be reduced as much as possible, and the meshing teeth should be compressed properly to reduce