9” x 20” geared head, belt driven, bench lathe - lansing makers .pdf

9” X 20” geared head, belt driven, bench lathe Model 45861 Set up and Operating inStructiOnS distributed exclusively by harbor Freight tools® . 3491 Mission Oaks Blvd., Camarillo, CA 93011 visit our website at: read this material before using this product. Failure to do so can result in serious injury. Save thiS Manual. © ® Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. For technical questions or replacement parts, please call 1-800-444-3353. cOntentS drive diagraM 23 iMpOrtant SaFetY tenSiOning rOller partS inFOrMatiOn 3 liSt 24 general pOwer tOOl Quadrant partS liSt 25 SaFetY warningS3 lathe SaFetY warningS 5 MOtOr hOuSing partS liSt . 26 grOunding 6 bed partS liSt 27 grOunded tOOlS: tOOlS gear bOX partS liSt 28 with three prOng plugS 6 gear bOX diagraM 29 eXtenSiOn cOrdS 7 SYMbOlOgY 7 aprOn partS liSt 30 SpeciFicatiOnS 9 aprOn partS liSt cOntinued 31 unpacking 9 liSt OF cOntentS 9 Saddle and crOSS Slide partS liSt 32 inStructiOnS FOr putting intO uSe 9 Saddle and crOSS Slide MOunting 9 diagraM 33 FunctiOnS 10 tailStOck partS liSt 34 Operating inStructiOnS 10 tai