2013秋 东财《工程测量》在线作业第二课（More than 2013 autumn engineering survey online homework lesson second）.docVIP

2013秋 东财《工程测量》在线作业第二课（More than 2013 autumn engineering survey online homework lesson second） More than 2013 autumn engineering survey online homework two Radio examination First, radio questions (20 questions, 80 points) 1. within the radius of () km, the horizontal plane can be used instead of the level surface for distance measurement. A. 5 B. 10 C. 15 D. 20 Full marks: 4 2. the main control points of the circle curve are (). A. starting point (straight point), turning point (curve midpoint), end point (circle straight point) B. intersection point (straight point), midpoint (curve midpoint), intersection point (circle straight point) C. intersection point (straight point), turning point (curve midpoint), intersection point (circle straight point) D. starting point (straight point), middle point (curve midpoint) and end point (circle straight point) Full marks: 4 The 3. optical theodolite consists of three parts: the base, the levelness and the following parts A. telescope B. vertical disc C. alidade D. level Full marks: 4 4. by A and B points elevation HA=100 meters, HB=200 meters, for elevation hAB = () meters. A. -100 B. +100 C. +200 D. +300 Full marks: 4 5. classification of Surveying and mapping A. surveying and mapping (Surveying), surveying and setting (construction lofting), monitoring (deformation observation) B. control surveying, fractal surveying, height surveying C. angle surveying, distance measurement, elevation surveying D. general surveying, photogrammetry, geodesy Full marks: 4 6. steel tape distance, measuring accuracy (what). A. to meet the requirements of accuracy B. absolute error C. relative error D. is wrong Full marks: 4 7. construction measurements of high-rise buildings mainly include (). A. based positioning and networking B. axis point survey C. height transfer D. or more Full marks: 4 8., sight measurement accuracy is generally (), accurate sight distance measurement of up to 1/2000. A. 1/100 to 1/300 B. 1/200 to 1/500 C. 1/200 to 1/3