技术规范书（Technical specifications）.docVIP

技术规范书（Technical specifications） Appendix 1 technical specifications 1, general provisions 1.1 this specification is the minimum requirements, does not make stipulations on all the technical details are not fully quoted by the provisions of the relevant standards and norms, the tenderer shall provide in accordance with industry standards, national standards and the specifications of high-quality products. 1.2 if the bidder does not file a written objection to the provisions of this specification, it means that the equipment provided by the bidder fully meets the requirements of this specification. In case of opposition, the bid shall be described in detail in the special section entitled difference table for the title of the bid. 1.3 the standards used in this specification shall be subject to higher standards in the event of inconsistency with the standards executed by the tenderer. 1.4 the matters not covered by the technical specifications shall be decided by the parties concerned in consultation and supply. 2, technical requirements 2.1 project construction basis In the design, construction to standard published by the Ministry of construction as the foundation, according to the actual needs of Rongcheng established standard GB, higher than the national standard based on the construction of this project will become the domestic first-class. Ministry of construction technical specification for municipal municipal comprehensive supervision information system (CJJ/T 106-2005) Ministry of construction urban grid comprehensive supervision information system unit meshing and coding rules (CJ/T 213-2005) Ministry of construction, municipal administration, integrated regulatory information systems, management components and event classification, coding and data requirements (CJ/T, 214-2007) Ministry of construction, municipal municipal comprehensive supervision information system geocoding (CJ/T 215-2005) Ministry of construction performance evaluation of municipal compr