npsm螺纹知识（NPSM thread knowledge）.docVIP

npsm螺纹知识（NPSM thread knowledge） Thread knowledge two 2007 04 Thursday 12 10:396.2.3 mechanical connection with cylindrical pipe thread NPSM Although the recommended pipe is connected with the inner and outer taper pipe thread, but some type of connection with the straight pipe thread is more favorable. The equipment free with the mechanical connection, the internal and external thread with NPSM thread is one of the types of connections. The straight pipe thread screw is widely used in dental products such as foot CSA. B125-98 standard for the selection of 1/2-14NPSM thread teeth in feet made clear. NPSM inside and outside the thread have accuracy class points. Our company generally adopts 2 levels, namely the internal thread is 2B level, the external thread is 2A level Example of straight pipe marking for mechanical connections: 1/8-27NPSM-2B 1/2-14NPSM-2A NPSM internal threads before tapping bit size used in table 6-3 Table 6-3 drill bits for NPSM internal thread before tapping: mm Thread specification, thread, small diameter, drill bit diameter MAX MIN 1/8-27NPSM 9.246, 9.093, 9.17 1/4-18NPSM 12.217, 11.887, 12.05 3/8-18NPSM 15.545, 15.316, 15.43 1/2-14NPSM 19.279, 18.974, 19.13 3/4-14NPSM 24.638, 24.333, 24.49 1-111/2NPSM 30.759, 30.505, 30.63 11/4-111/2NPSM 39.497, 39.268, 39.38 11/2-111/2NPSM 45.568, 45.339, 45.45 2-111/2NPSM 57.607, 57.379, 57.49 Note: NPS belongs to the American Standard thread threaded cylindrical tube, the standard number: ANSI B2.1; NPSM belongs to thread mechanical connection with a cylindrical pipe thread, the standard number it is ANSI B1.20.1 NPSC belonging to the United States; thread pipe joints with cylindrical internal thread, it is also the standard ANSI B1.20.1. NPS, NPSM and NPSC are visible three different threads. Use should pay attention to the difference. Especially NPS and NPSM threads, know the two different threads in the thread in general do not associate with mixed use, to prevent abnormal. The 60 - inch standard pipe t