中级电工考试（Intermediate electrical examination）.doc

中级电工考试（Intermediate electrical examination） The total current in a parallel circuit is equal to the sum of the resistances (the sum of currents) The number of magnetic lines perpendicular to a unit area of 3 is called magnetic induction 4 when wt=240 degrees, I1, I2, and I3 are negative values (plus.0) 5Y D step-down Start refers to when the motor is started, the stator winding is connected to Y shape to reduce the starting voltage and limit the starting current 6 the following forms of pollution do not belong to ecological damage (land subsidence) 7 the following electromagnetic pollution does not belong to the nature, (radio frequency electromagnetic pollution) 8 noise can be divided into gas dynamic noise (mechanical noise) and electromagnetic noise 9 electrical instructions according to the instrument, measuring mechanism and working principle are divided into (magnetoelectric instrument and electric instrument) 10 the following electrical indicating instruments shall be in accordance with the measuring objects of the instrument (power and phase table) 11 in the use of electrical indicating instruments, accuracy is a very important technical parameter, and its accuracy level is usually divided into (seven) 12 in order to improve the accuracy of the measurement, the instrument should be measured at the full value of the instrument (2 / 3) whenever possible 13 when the electrical indicating instrument is used, it is usually determined by the accuracy of the instrument. For example, (2.5) meters are often used in engineering measurements The frequency range of 14 electronic measurement is extremely wide, its low frequency has entered the 10 - 4, 10 - 5 HZ range, while the high-end has reached (4 x 10 - 10) 15 the left and right movement of the universal milling machine worktable is controlled by the control handle, and the linkage controls the stroke switches SQ1 and SQ2, which control the worktable (right and left) respectively 16X6132 type universal milling machi