A 600-W Input, Isolated PFC Power Supply for …（600 w的输入,孤立的PFC电源u2026）.pdfVIP

A 600-W, Isolated PFC Power Supply for AVR Amplifiers Based on the TAS5630 and TAS5631 Users Guide Literature Number: SLOU293C June 2010– Revised September 2012 WARNING Always follow TI’s set-up and application instructions, including use of all interface components within their recommended electrical rated voltage and power limits. Always use electrical safety precautions to help ensure your personal safety and the safety of those working around you. Contact TI’s Product Information Center http://support/ti./com for further information. Save all warnings and instructions for future reference. Failure to follow warnings and instructions may result in personal injury, property damage, or death due to electrical shock and/or burn hazards. The term TI HV EVM refers to an electronic device typically provided as an open framed, unenclosed printed circuit board assembly. It is intended strictly for use in development laboratory environments, solely for qualified professional users having training, expertise, and knowledge of electrical safety risks in development and application of high-voltage electrical circuits. Any other use and/or application are strictly prohibited by Texas Instruments. If you are not suitably qualified, you should immediately stop from further use of the HV EVM. 1. Work Area Safety: (a) Keep work area clean and orderly. (b) Qualified observer(s) must be present anytime circuits are energized. (c) Effective barriers and signage must be present in the area where the TI HV EVM and its interface electronics are energize