电线算法（Wire algorithm）.doc

电线算法（Wire algorithm） The electrical current load calculation formulas and common number 2009-11-01 20:51 conductor ampacity and wire section, or material type and wire laying method and environmental temperature and so on, there are many factors affecting the complicated calculation. The ampacity of various wires can usually be found in the manual. But the use of formulas with some simple arithmetic, can be calculated directly, without look-up table. 1. formulas of aluminum core insulation wire section carrying capacity and multiple relationship 10, five, 100, two, 25, 35, four, three,. 70, 95, two and a half times. Tube, temperature, eight or nine fold. Add half bare. Copper upgrade. Description formulas for various section carrying capacity (ANN) is not directly pointed out, but with the section multiplied by a certain multiple representation. For this reason, the nominal sections (mm2) of our usual wires are arranged as follows: 1, 1.5, 2.5, 4, 6, 10, 16, 25, 35, 50, 70,, 95, 120, 150, and 185...... (1) pointed out that the first sentence rhymes aluminum core insulated wire carrying capacity (ANN), according to the times of calculation section. The formulas in Arabia digital said the conductor section (mm2), Chinese characters digital times. The formulas of section and multiple relationships arranged as follows: 1~1016, 2535, 5070, 95120 or more Five times four times three times two times two times Now more and more clearly the control formula, formula 10 under five refers to the section below 10, carrying capacity is five times the value of cross section. Common number: The load of the wire is determined by the thickness of the wire diameter and the cross-sectional area, as follows: 4 square mm copper power line of the safe carrying capacity 35A. 6 square mm copper power line of the safe carrying capacity 48A. 10 square mm copper power line of the safe carrying capacity 65A. 16 square mm copper power line of the safe carrying capacity 91A. 25 square mm copper po