如何提高windows内存利用率（How to improve windows memory utilization）.doc

如何提高windows内存利用率（How to improve windows memory utilization） Optimizing memory, improving the efficiency of memory usage and improving the speed of operation are our concerns. Here are some ways to improve memory usage and optimize memory management in the Windows operating system. 1, change the location of the page file The main purpose is to maintain the continuity of virtual memory. Because the hard disk reads the data read on the magnetic head by the magnetic head, the page file is placed on different areas of the disk, and the head will jump and jump, which naturally is not conducive to improving efficiency. Moreover, the system disk file is large, and the virtual memory must not be continuous, so it should be placed on other disks. Method to change the page file location is: use the mouse right click my computer and select properties - Advanced - performance settings - Advanced - change virtual memory, position in the drive bar to choose to change. It is worth noting that when you move a good page file, you want to delete the original file (the system will not automatically delete). 2, change the size of the page file After changing the location of the page file, we can also adjust the size of the page. When adjusting, we need to be careful not to set the maximum and minimum page files to equivalence. Because the memory is not really stuffed, it automatically puts a portion of unused data into the hard disk when the memory reaches a certain level. The smallest page file, the greater the proportion of low, the speed of execution is slower. The maximum page file is the limit value, and sometimes open many programs, memory and minimum page files have been stuffed, it will automatically overflow to the maximum page file. So it is not reasonable to set the two as equal. In general, the minimum page file is smaller, so that more data can be stored in memory as much as possible. The maximum page file is set too large, so as to avoid a full situation. 3, disable page f