弹性楼板（Elastic floor）.docVIP

弹性楼板（Elastic floor） The floor structure system without beam is also called slab column structure system, which is relative to the beam and slab structure system. In our country, there is no beam floor Structural system is a new construction technology which is developing more rapidly in recent years. Compared with the traditional multi ribbed beam structure, it has integrity Good, large construction space, can effectively increase the advantages of high layer. Also, the seismic effect of buildings with flat slab systems should be clear A building that is significantly smaller than a larger storey beam slab structure. In the aspect of construction, the construction of the system without beam floor structure has construction The utility model has the advantages of simple formwork, convenient binding of steel bars on the floor, convenient installation of equipment, etc., thereby greatly improving the construction speed. Therefore, the use of non beam The floor structure has obvious economic and social benefits. For the structure without beam floor, the design calculation is mainly divided into two parts: the spatial structure analysis of the whole structure and the no Liang Lougai Body analysis and calculation. At present, PKPM series structure design software has already had the mature analysis method to these two aspects design. Now lets make some introductions: Overall three-dimensional calculation of 1. non beam floor The overall calculation of the non beam floor structure can be carried out through TAT software or SATWE software in PKPM software. Of course, these two The software is different for the modeling of the non - beam floor in the three-dimensional calculation: In TAT software, for a slab less floor structure, since there is no beam to column connection, we usually have to follow the specifications The plate is simplified as a two-way frame beam. Therefore, when using the PMCAD to make the interactive modeling of the non - beam floor, First of all, the wi