新时达32位主板故障代码说明(Step 32 motherboard fault code).docVIP

  • 118
  • 0
  • 约 6页
  • 2017-07-24 发布于河南
  • 举报

新时达32位主板故障代码说明(Step 32 motherboard fault code).doc

新时达32位主板故障代码说明(Step 32 motherboard fault code)

新时达32位主板故障代码说明(Step 32 motherboard fault code) Step 32 motherboard fault code Fault code, fault description, cause of failure 2 reasons in the operation of the lock disengaged fault: 1. door operation knife wiping croquet thread loose 2. locks; 5 door switch fault, the cause of the fault: 1., 3 seconds after opening the door lock switch can not be opened; 2. door opening limit and closing limit at the same time action; 3. door opening limit and door lock switch at the same time. Handle: repair and reset 6: can not be closed automatically after eight attempts are still unable to close the door arrives, fault: 1. safety action; 2. closed limit damage; 3. call button card dead; 4. door slipping or not working; 5. door machine system of mechanical clamping. Treatment: press the close button reset 7 after the instruction is given, the inverter does not give the feedback signal for operation within 3 seconds. The cause of the fault is: 1.. The signal of the frequency converter is broken or not connected; the 2. frequency converter parameter is wrong 8 communication failure, 20 consecutive seconds the motherboard did not receive the SM-02 board communication signal, the cause of the failure: 1. communications interference; 2. communication interruption; 3. terminal resistance is not short 9 frequency converter fault signal, fault reason: frequency converter fault 13 terminal strong switch fault, cause of failure: up and down single layer strong switch at the same time 14 terminal Stipping switch position error: over a period of time, many terminal switch operation, the detected position than the record self-learning position from the terminal layer near 300mm, fault: 1. elevator to the end station, terminal Stipping switch does not move; 2. switch position and the reference the position is above 300mm. Processing: maintenance, reset and self-learning 15 terminal station Cuoceng: stop at the door area, the phenomenon of single terminal Stipping switch is operated, but the e

文档评论(0)

1亿VIP精品文档

相关文档