墙纸贴法（Wallpaper binding）.docVIP

墙纸贴法（Wallpaper binding） Add a little more text means of preparation Bucket, ruler, pencil, tape, scissors, knife, cloth, sponge, ladders, roller, scraper, glue worktable, stirring rod, pressure wheel, soft brush Wall treatment First, in principle, to smooth, dry, uniform color, you can wallpaper. Two, cement, brick wall: itself is more flat, with putty leveling, brush on thin, clear paint can be affixed to wallpaper. 1. gypsum board, plywood and blockboard: there are joints exist, so first fill seam, and then approved. 1), patching putty to add more glue (vinyl acetate resin), the joint firm, wont crack. 2), batch of flat with putty: as long as the addition of a small amount of glue, so that sand mill. 2. gypsum powder and glue to replace the batch of flat with putty, can accelerate the drying, shorten the construction time. 3.: the wall wall is not the existence of solid powder should be removed sanding, leveling, brush on the membrane can wallpaper. 4., light wall: the wall is very smooth (such as painted walls), not easy to absorb glue, not easy to dry, then the force will drop, so you can post wallpaper after sanding. 5. coating wall: it is suitable for changing wallpaper, but after doing sanding treatment, brushing wallpaper basement film can be constructed. Three, with the basement membrane will be painted on the whole wall again, in case of easily wet, moldy walls can be appropriate to brush again, after all the varnish dry, you can post wallpaper Four, the basement membrane function: the film aims to cure and protect the putty surface, also can strengthen the wall surface waterproof, mouldproof function, but to completely dry before brushing putty (film is environmental protection product, easy to do, is the traditional varnish substitute). Glue on wallpaper The glue amount of reference: Paper wallpaper: wallpaper, rubber powder, a package (160 grams) Special glue jar (400 grams) Glue surface (paper base) Wallpaper: special wallpaper, rubber powder a package