一机多图的设置（A multi machine set）.doc

一机多图的设置（A multi machine set） Now as before, GPS is keen on MP3 crazy as keen on MP3, before the firmware upgrade, disassemble, DIY and memory. Now the enthusiasm has shifted to GPS. Now GPS playability is already quite high, a multi machine, Google Earth has become the current hot words. And I have the honor to play the Freelander GPS, it is quite simple to achieve a machine in multi Freelander GPS. The theory is that N graphs can be implemented as long as there are sufficient graphs and sufficient disk space. As long as the win CE system can achieve a multi machine, a machine which is not limited to multi machine. You may have a heart with me, below, to achieve a machine multi. The experience of multi happiness will start from here. To achieve a multi machine, specifically including any of the following software, of course, nowadays a machine multi software more, is nothing more than a good interface, easy to use is strong, which is similar, the key is to GPS machine path settings, it is crucial that I have set up around the bend in the path so, I will share my experience with you. A machine app download: MobileNavigator.rar download address: this post hidden content needs to be answered before you can browse (the more beautiful interface, and can use anti compile software for custom interface, playability.) Navigation.rar download address: this post hidden content needs to be answered before you can browse (interface has been customized by the author, it is necessary to change quite troublesome, the interface is relatively simple, but pay attention to practical, used in 4.3 inch models, the interface is more attractive, if used in 7 inch models, the interface is ugly) According to my above two software pros and cons of selective download. The first step: a multi machine is to determine the name of your SD card, this is very important, remember that, in general, the same brand name is the same as the default GPS SD card, but I used a variety of machines, SD card na