修改mp3开机画面（Modify the MP3 boot screen）.docVIP

修改mp3开机画面（Modify the MP3 boot screen） MP3 boot screen modify tutorial Every time MP3 boot, always display the same picture, often make people tired. Do you want to let your love show personalized picture your own boot? Take VX707 as an example to show you how to modify the boot screen of MP3. Using software: 1, iBeadResEdit v0.72 (resource file modification software) 2 、 Photoshop, ACDsee and other image software 3, MP3 firmware update program Necessary preparation: Modify the boot screen, of course, need to prepare a new boot picture, you can according to your own preferences or prepare a BMP format 128X48 or 128X64 pixels of the picture. Step: 1, open the resource.bin file with iBeadResEdit. 2. Find the resource named 276-list:18 and select, and click the small box with the arrow above the left of the page to expand. As you can see, there are some BMP pictures, 002 and 003 of which are the pictures when they are switched on. As you can see, the two pictures are just the left half and the right half of the boot screen. All we have to do is change these two pictures. 3, click File, and select Export bitmaps in the drop down menu to export the bitmap from the resource file to a new folder. 4. Find two pictures of 276-002 and 276-003 in the exported bitmap folder. The prepared boot picture will be cut into two 64X48 or 64X64 pixel BMP images with Photoshop or ACDsee software, and two 276-002 and 276-003 pictures of the original boot screen will be replaced accordingly. 5, go back to iBeadResEdit, click File, and select Import bitmaps in the drop down menu to import the modified file into the resource file. At this point, the old boot screen has been replaced by the new boot screen. Finally, dont forget to save Save. 6. Rerun the MP3 firmware update program and reset the firmware. OK! Create personalized MP3 Interface tutorial (iBeadResEdit Guide) MP3, iBeadResEdit, tutorials, tutorials, interfaces Disclaimer: this tutorial is for use only by capable people, not intere