复印机常见故障及解决方法(经典之二)（Common troubles and solutions of copier (classic two)）.docVIP

复印机常见故障及解决方法(经典之二)（Common troubles and solutions of copier (classic two)） Common faults of copiers and solutions (classic two).Txt (six) the difference of the image sharpness of the copy is low Cause and elimination of trouble: 1. exposure due to excessive exposure during copying. Adjust exposure voltage or light slot. 2. the focus of the lens and the mirror is poor. Adjust the distance and angle between the lens and the reflector. 3. selenium selenium drum work too long, surface pollution, excessive toner or oxidation film. Clean or replace photosensitive drums. 4. toner particles are too large, the development of the image surface roughness, resulting in reduced resolution. If the image is black and not clear, consider the possibility that the toner under the developer is too much. (seven) the image density of copy is uneven Copies of the images are uneven, divided into two cases: One is regular uneven; the other is irregular uneven. A) the cause and elimination of regular irregular faults: The 1. electrode wire and the photosensitive drum are not parallel, resulting in uneven transfer of corona. 2. exposure narrow seam on both sides of the non parallel, resulting in uneven exposure. 3., the machine has the interference of random reflection light. 4., the developing roller is not parallel with the surface of the photosensitive drum; in the liquid dry developing process, the extruding roller is not parallel with the photosensitive drum; the uneven gap of the developing gap can cause the above unevenness. B) the cause of irregular irregular breakdown and the way to eliminate it: 1. copy paper partially damp. 2., the exposure of light tubes, glass and other optical parts are contaminated, affecting the light reflection and transmission of uniform. 3., charging and transfer of electrode wire pollution, resulting in uneven discharge. To prevent this kind of circumstance, should often keep the electrode clean, make discharge evenly. 4. hot roller fixing machine, because