机械设备维修)（Maintenance of mechanical equipment)）.docVIP

下载本文档

4
0
约1.08万字
约 8页
2017-07-24 发布于河南
举报
版权申诉

机械设备维修)（Maintenance of mechanical equipment)）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

机械设备维修)（Maintenance of mechanical equipment)）

机械设备维修)（Maintenance of mechanical equipment)） 1. crane wheel gnawing rail: when the crane running in the wheel flange and track side extrusion and friction, and wheel flange and rail side of significant wear, this phenomenon is called wheel gnawing rail. 1. what is the dimensioning method? What should be paid attention to when using this method to repair the defective parts? Answer: a pair of matched complex components in parts by machining methods will wear parts of the shape, position accuracy and surface roughness of repair, and one relatively simple parts and repair parts corresponding to the dimensions of the new replacement, the ability to work with the Deputy complete recovery, repair method the method of repairing size. Should pay attention to when applying this method to repair failure parts: after repair, parts of the original strength shall not be greatly weakened, when necessary to check the strength or stiffness of the surface heat treatment of parts after repair still retain a certain depth of heat treatment, to ensure that the parts of the original performance. 2. briefly describe the process of repairing mechanical failure parts with thermal spraying technology. Answer: thermal spraying process is as follows: Spray preparation: including workpiece cleaning, surface preparation, surface roughening and preheating processes. Spraying the bonding layer: spraying the bonding layer immediately after the workpiece being treated, spraying the bonding layer can improve the bonding strength between the work layer and the workpiece. The thickness of the bonding layer is generally 0.10 ~ 0.15mm, and the spraying distance is from 180 to 200mm. If the thickness is too thick, the bonding strength of the working layer will be reduced, and the coating thickness will be reduced and the economy will be poor. Spraying work layer: spraying the working layer immediately after spraying with the combination layer. The quality of spray coating mainly depends on the powder fe