机电题（Mechanical and electrical problems）.doc

机电题（Mechanical and electrical problems） Simple answer: 1. whats the relay? Whats the use of it? A relay is an electrical device for switching on and dividing the control circuit according to the input signal. Relay and contactor are different, can not be used to directly connect and break large current load circuit, but mainly used for motor or line protection, and the production process sequence control. Purpose: in general, by measuring the relay link external input signal and transmitted to the intermediary, and he will be setting value, when reaching the settingvalue intermediary makes the actuator output action, thereby closing or breaking circuit, control circuit to achieve the purpose of. What are the control features of the electric control system of 2.XA6132 horizontal lifting table milling machine? 1, electrical control circuit and unloading with quite closely, so to understand the relationship with mechanical structure and electrical control analysis, but the mechanical structure is relatively complex. 2, the control circuit is equipped with variable speed impulse control, so that the speed change smoothly. 3, use more ground control, easy to operate. 4. It has perfect electrical equipment chain, and has short circuit, zero voltage, overload and over stroke limit protection links. 3. design a three-phase asynchronous motor single direction start and stop control circuit. 4. what are the characteristics of energy consumption braking and reverse braking? The brake is out after three-phase AC power in motor stator winding with a DC voltage, the DC current flows into the brake rotor has reached by induction current and static magnetic field to. The so-called anti braking, in the motor cut off the normal operation of the power supply, while changing the motor stator winding power phase sequence, so that there is a reverse trend and produce a larger braking torque method. The essence of reverse braking is to brake the motor to reverse, therefore, when the motor