聚氨酯发泡（polyurethane foam）.docVIP

聚氨酯发泡（polyurethane foam） polyurethane foam Catalog I. advantages of polyurethane foam Two. Application construction of polyurethane foam Three. Performance and parameters Four. Safety and applicability Five. Disadvantages of foaming polyurethane foam Edit this paragraph I. advantages of polyurethane foam Rigid polyurethane foam with isocyanate and polyether as the main raw material, the foaming agent, catalyst and flame retardant additives under the action of special equipment by mixing polymer by high pressure spraying foam into. Polyurethane foam is a kind of new synthetic insulation materials and waterproof function, its low thermal conductivity is only 0.022 ~ 0.024W/ (m k), equivalent to half of the board, is the thermal conductivity of thermal insulation material in the lowest of all. At present, polyurethane foam is mainly used in building exterior wall insulation, roofing waterproof and thermal insulation integration, cold storage insulation, pipe insulation materials, building plates, refrigerated trucks and cold storage insulation materials. Nanjing Yangtze River Delta waterproof insulation materials Co., Ltd. the latest research and development of rigid foam polyurethane on-site spraying B1, B2 grade products, can be used for flame retardant demand of various projects, cold storage and pipe insulation. 1. good heat preservation. Thermal conductivity of about 0.025, better than polystyrene board, is currently building insulation better material. Polyurethane foam pictures (9 sheets) 2. good waterproof performance. Foam hole is closed, the closure rate of 95%, rainwater will not seep through the hole. 3., because the site spraying, forming a whole waterproof layer, no seams, any polymer coil is not enough, reduce the maintenance workload. 4. good adhesive property. Wood, metal, and bonded to the brick, glass and other materials to be very strong, not afraid of wind up. 5., for new roofing or old roofing maintenance is very appropriate, especially old roofin