基于CAN的无触点车灯开关控制系统研究与实现.pdf

学兔兔 开发研究 而 基于CAN的无触点车灯开关控制系统研究与实现 郭亚利 吴钦木 王红蕾 (贵州大学 电气工程学院 贵阳 550003) 摘 要：应用CAN和霍尔元件设计了无触点式车灯组合开关控制系统。与传统的接触式开关系统相比， 基于霍尔元件的无触点开关具有速度快、无机械磨损、无瞬问抖动、安全可靠以及寿命长等优点；与传 统的开关控制系统相比，基于CAN 的数字化开关控制系统具有节约安装成本、易于维护、可靠性高以 及稳定性好的特点。通过搭建系统的硬件平台和设计车灯组合开关控制系统的控制软件，并进行实验， 实验结果表明，提出的设计及实现方法是可行的。 关键词：车灯控制：电子组合开关；霍尔元件；CAN总线 ；汽车网络 Research and Realization of Contactless Switch System in Car Light Control Based on CAN BUS GUO Ya-li WU Qin-mu Ⅵ NG Hong-lei (Electrical Engineering College Guizhou University Guiyang 550003 China) Abstract：This paper is about a car light control s~tem of contactless electronic combination switch designed by applying CAN bus and hall elements．Compared with traditional contact combination switch，contactless combination switch based on hall elements has many advantages，such as high speed，no mechanical wear,no instant jitter,good safety and reliability,long life．Compared、vim traditional switch control system．digital switch control system based on CAN bus has many good characteristic，such as less installation costs，easy maintenance，hi曲reliability,good stability．By building hardware platform of system and designing control software of car light combination switch control system，many experiments had been done and it turned out that the proposed design and realization method is feasible． Keywords：car light control；electronic combination switch；hall elements；CAN bus；auto network 靠性都较差lJ J。为了克服以上缺点，无触点式的电子 引言 组合开关的开发显得很有必要，它具有无触点、智能化、 中国汽车行业发展日新月异，汽车消费市场越来 可靠性高的优点。随着车载电气设备的电子化和智能 越大，小轿车进入高速的发展期，而安全和舒适是现 化，汽车的电