efx安装教程（EFX installation tutorial）.doc

efx安装教程（EFX installation tutorial） First, the skeleton model is established, which is a series of reference axes and datum points; Then build a single part. The feature of the part is to Insert Advanced pipes; Finally, in the component mode, the additional part of the tube and the tube are removed with a tensile feature. The following three methods are optional: 1. Make the decompressed files into mirror files and install them. 2, the unpacked files copied to the root directory of a disk, running setup.exe can be carried out, otherwise, setup.exe no response. 3, you can also find unpacked files, \ProENGINEER, Progressive, Die, Extension (PDX), R5.0, F000 (progressive die design), \dsrc\i486_nt\obj in ptcsetup.exe, double-click to install. Installation method: 1 Click setup.exe to install until the installation is complete. 2, modify the PDX config.pro file: Open the \pdxRelease 5.0\text\config.pro file under the installation directory and change the following line in the file Protkdat _LOADPOINT_\text\protk.dat Change the trip to: Protkdat installation directory \pdxRelease 5.0\text\protk.dat (that is, change the _LOADPOINT_ to the installation directory) to save. 3, modify the PDX registry file protk.dat: Open the \pdxRelease 5.0\text\protk.dat file under the installation directory and change the following line in this file Exec_file installation directory \pdxRelease 5.0\$PRO_MACHINE_TYPE\pdx50.dll (1) if you want to install this PDX R5.0 under Pro/E 2000/2000i/2001, skip this step and not do it Without any modification. (2) if you want to install this PDX R5.0 wildfire in Pro/E 2.0/ wildfire 3, please modify this behavior: Exec_file installation directory \pdxRelease 5.0\$PRO_MACHINE_TYPE\pdx50_wildfire2.dll (3) if you want to install this PDX R5.0 wildfire in Pro/E 4.0/ wildfire 5, please modify this behavior: Exec_file installation directory \pdxRelease 5.0\$PRO_MACHINE_TYPE\pdx50_wildfire4.dll Save after modification is complete. 4, modify the Pro/E startup