fb-318说明书（Fb-318 manual）.docVIP

fb-318说明书（Fb-318 manual） About the contents of the fb-318 instructions Classic radio manual Commonly used car platform instructions welcome to add LT6600 manual Search the site for more information about fb-318 instructions Microcomputer chip control, easy to operate and more powerful. PLL frequency synthesis, frequency conversion, channel is more convenient. With automatic power-saving function, effectively prolong the waiting time of the receiving state. - can work in frequency mode, channel mode, different frequency transceiver mode. Built in EEPROM memory, free storage of 100 channels. - unique CTCSS encoding scanning function, can quickly obtain encoding information. - the hardware sub circuit can set up 50 sub audio (67-254Hz). -VOX sound control transmitter, adapt to driving, high-altitude operations and other occasions. - familiar with the machine Power (power switch) /Volume (volume) knob clockwise rotation of the knob, can be connected to the intercom power supply, the knob is adjusted to the proper position at the same time. Turn off the walkie talkie when the power supply, turn counterclockwise in the end. When the LED indicator is fired, the red light is on, and when the signal is received, the green light is lit. When the battery voltage is lowered, the red indicator will darken. The squelch knob counterclockwise rotation of the squelch control in the end, the speaker should be issued a rustling sound. Slowly clockwise squelch knob to make rustling sound just disappeared, the squelch opening highest sensitivity. When adding CTCSS encoding, the squelch control still has a role, please adjust, avoid small signal loss. PTT launches the button, when the conversation presses down the launching key, the mouth speaks 5 centimeters from the microphone. Press PTT and press MONI to switch the VOX function. Press PTT while pressing the FUNC key to perform the CTCSS encoding scan. The MONI (listen) press this key can be forced open squelch, weak signal monitoring.