catia软件的10个使用技巧（10 skills for using CATIA software）.docVIP

catia软件的10个使用技巧（10 skills for using CATIA software） 10 skills for using CATIA software CATIA is an excellent three-dimensional design system which is developed by Dassault company of France and integrates CAD/CAM/CAE. It has been widely used in mechanical, electronic, aerospace, automotive and other industries. Because the software system is huge and complicated, unlike the AutoCAD two-dimensional software is easy to grasp, and the relevant software application of books and materials and less, to be skilled in the use of the software, not only need time to explore and experience in learning and application, also need to be with other people more exchanges, learn from each other. The following is a brief introduction to some skills to write a master in the process of learning and the use of the software. Several methods of drawing 1. nuts The first paint six prism, and then use a small triangle rotation resection. The first painting column, then the cylinder bottom surface of chamfered edge, with hexagonal stretching outward resection. 2. naming of 3D parts modeling When the part is modeled, the system automatically names the parts at the beginning of its model tree, typically Part1, Part2... Default form. The default parts names in the model tree may have the same when each part of the boot is modeled. Since the parts will eventually be introduced into the assembly diagram, parts with the same part name cannot be called simultaneously in the assembly environment, and the duplicate name needs to be renamed. If you assemble a large part, you may encounter this problem many times. In order to avoid the unnecessary trouble, I suggest that before the 3D part model, prior to the model tree default system parts name into the part file will use the name, which not only avoids the repeated parts name, parts can be easily saved. 3. tolerance marking In the part of the engineering drawings are often eg.tolerance Phi 39 + 0.05 mark, CATIA default font SICH cannot be marked acco