跑步机焊接组件组装方案.pdfVIP

跑步机焊接组件组装方案 Automatic Bearing Shaft Fit Assembly Machine Date:2015Date2015-0505-1212 Version:3.0 Prepparedbyy:MechanicalTeam2 江苏苏比微曼智能科技有限公司微曼智能科技有限公司 Jianggsu BVM Intelliggent Technologygy Co. Ltd. 地址：江苏省苏州市高新区昆仑山路189号9栋3F 电话：0512127 传真：0512102 技术要求 1.设备功能 equipment function 本设备为跑步机焊接组件8个辅件的自动组装设备，多工序并行方式，运行高效、稳定。 The case shows the design of an automatic bearing shaft press fit assembly machine with parallel assembly procedures, which can press fit 8 parts( including bearings) into the welding frame. The designed automatic assembly machine has stable and reliable operation and high output efficiency. 2.设备特点 Equipment characteristics （1）多工序并行组装，生产效率高Parallel assembly with high efficiency ； （2）辅件和主体全部自动上料，操作人员少，劳动强度低All the materials are loaded and fed automatically, to reduce the workload of the operators ; （3）多种传感器监测（压力传感器+位置传感器），保证装配安全，杜绝故障发生概率； All the fixtures and press fit points are monitored online by pressure and location sensors, thus toto guaranteeguarantee safetysafety assembly;assembly; （4）预留曲柄组装工位，可实现后续升级; For further update, keep the work station for the crank assembly in the current machine; （5）预留有液压杆安装位置，可供后期增加，更换模具安装板可适应不同产品组装； With good compatibility, change fixtures can compatible for different types of assembly; （6）压力传感器记录每次压合压力，可实现后期不良品跟踪； Pressure curve record online for every press fit, NG track is available; （（77））液压杆能提供稳定压力液压杆能提供稳定压力，工作比气压更平稳工作比气压更平稳，且成本不比气压高且成本不比气压高。 Driven by the hydraulic system, cost-low but work stale. （8）人工更换模具可实现黑色辅件的拆除。 Attachment parts disassembly are avaliable 产品性能 Performance 产能 circle time：60s/pcs 角度精度Angularity Tolerance ：0.5° 位置精度Position Tolerance ：0.1mm 操作：全自动或仅人工主料上下料供客户选择 fullll automatiicalllly or manualllly weldilding frame lloadiding for optiionall 气源压力air pressure：≥0.5MPa 气源流量气源流量air